WyjĄtkowo Nie Typowe Pytanie

[mareknyc]

Wedlug regionfreedvd do przerobki pioneera 350 potrzebny jest tylko palmtop
A wyglada to tak (wersja instrukcji angielska)You need:
PDA w/Palm OS 3.0 or later
OmniRemote Pro V2.02 (http://www.pacificneotek.com/)
Sony Clie peg-SL10

Type in (or transfer) the memo below to your PDA.
As a memo you can import it into OmniRemote with this menu command:
Advanced-->Databases-->Import category

When done, point your PDA towards your DV-454, put OmniRemote in TV-mode and press 0 (Zero)

That's it!!

Some stores charge $35 for this! All I ask is a small donation ($1 or more if you like) to help my site!

Memo (Name: Category-TV):
Category-TV
Button name-Enter
0000 0067 0000 0000
Button name-0
0000 0069 0049 0000 0154 00AA 001E 0032 0019 003C 001E 000F 0019 000F 001E 000A 001E 0037 0014 0005 0005 000A 001E 0037 001E 000A 001E 000F 0014 003C 001E 0037 001E 0037 0014 0014 001E 0037 0014 0014 001E 0037 001E 000A 001E 000A 001E 0037 001E 0037 001E 000A 001E 000A 0019 003C 001E 000F 0014 003C 001E 0037 001E 000A 001E 000F 0014 0005 0005 0032 001E 0037 001E 000A 001E 045B 0154 00AA 001E 0032 001E 0037 001E 0037 001E 0037 0019 000F 001E 0037 0014 0014 001E 0037 0014 0014 001E 000A 001E 000F 0019 000F 001E 0037 0019 000F 001E 0037 0019 000F 001E 0037 0014 0014 001E 0037 001E 0032 001E 000F 001E 0032 001E 000F 0014 0005 0005 0037 0019 000F 001E 0037 0019 000F 0014 0005 0005 000A 001E 0037 001E 000A 001E 0037 001E 0037 0014 0465 014F 0000
Button name-7
0000 0067 0000 0000
Button name-8
0000 0067 0000 0000
Button name-9
0000 0067 0000 0000
Button name-4
0000 0067 0000 0000
Button name-5
0000 0067 0000 0000
Button name-6
0000 0067 0000 0000
Button name-1
0000 0067 0000 0000
Button name-2
0000 0067 0000 0000
Button name-3
0000 0067 0000 0000
Button name-Channel up
0000 0067 0000 0000
Button name-Channel dn
0000 0067 0000 0000
Button name-Last
0000 0067 0000 0000
Button name-Volume up
0000 0067 0000 0000
Button name-Volume dn
0000 0067 0000 0000
Button name-Mute
0000 0067 0000 0000
Button name-Power
0000 0067 0000 0000
Button name-Favorite
0000 0067 0000 0000



Quote from a user:
"The first version of OmniRemote did not start at all due to some error with the IR-port.

When I found another version of OmniRemote, I could not import the memo as a database. OmniRemote only registered 17 of 19 "buttons". I had to export a database from OmniRemote, edit it as a memo and then import it again, to make it work. When I had pressed the "0" button about 39 times, my DVD player restarted and accepted DVD's from region 1,2,3 and 4."

Alternatives:

because some don't like PDAs and expensive remotes,
have converted the (broken) Pronto Codes to Codes
for the Linux "lirc". (Linux Remote Control)

There is also windows version of "lirc", but don't know if this config file will work fro windows.

See http://www.lirc.org/ for details.

Save the following lines as /etc/lircd.conf
start "lircd"
now type

"rc send_once pioneer region"

Thats it !

Have fun !



---- lircd.conf starts here ----
#
# pioneer Region Hack
# converted and adjusted from PRONTO Hex-Codes
# by peter
#


begin remote

name pioneer
flags RAW_CODES
eps 30
aeps 100

ptrail 0
repeat 0 0
gap 35000

begin raw_codes
name region
8575 4211 576 1547 576 1547
576 493 576 493 576 493
576 1547 576 493 576 1547
576 493 576 493 576 1547
576 1547 576 1547 576 493
576 1547 576 493 576 1547
576 493 576 493 576 1547
576 1547 576 493 576 493
576 1547 576 493 576 1547
576 1547 576 493 576 493
576 1547 576 1547 576 493
576
25454
8575 4211 576 1547 576 1547
576 1547 576 1547 576 493
576 1547 576 493 576 1547
576 493 576 493 576 493
576 493 576 1547 576 493
576 1547 576 493 576 1547
576 493 576 1547 576 1547
576 493 576 1547 576 493
576 1547 576 493 576 1547
576 493 576 493 576 1547
576 493 576 1547 576 1547
576
end raw_codes

end remote
---- lircd.conf ends here ----


Does this simple circuit (one resistor,IR-led & diode) work with WinLIRC and Pioneer DV-350?

http://www.lirc.org/transmitters.html

Yes it works! All you need is 3 components and a serial port connector. In WinLirc you must enable TDR.

More methods for WinLIRC (quoted):

This is how I got it to work with WinLirc:

1) remove following files from WinntINF

*irda*
irnsc.inf (might be different dep. of your hardware)
netirda.inf

(I'm not sure if all these really need to be removed. Remember to leave a backup copy)


2) In Device Manager: Uninstall the IBM ThinkPad Fast Infrared Port (or similar Ir device)


3) edit WinntINFnetirsir.inf: (INF editing info is copied from WIRC pages)

Remove following lines

%*PNP0510.DevDesc% = PNP, *PNP0510
%*PNP0511.DevDesc% = PNP, *PNP0511

Change line
ExcludeFromSelect=*PNP0510,*PNP0511,*IBM0002,*IBM0 034,*IBM0020

to this

ExcludeFromSelect=*IBM0002,*IBM0034,*IBM0020


2) Edit WinntINFmsports.inf

Add these lines to section [Std]:

%*PNP0510.DeviceDesc% = ComPort, *PNP0510, *PNP0511 ; Communications Port

%*PNP0511.DeviceDesc% = ComPort, *PNP0511, *PNP0510 ; Communications Port


Add these lines to section [Strings]:

*PNP0510.DeviceDesc = "Generic Ir Serial Port"
*PNP0511.DeviceDesc = "Generic Ir Serial Port"

Add this line to section [ControlFlags]:

ExcludeFromSelect=*PNP0510,*PNP0511


3) Reboot and let the hardware wizard run and it should find the driver for "Generic Ir Serial Port".

If everything goes ok you will see "Generic Ir Serial Port (COM2)" in the device manager.

I also changed the speed for this com port for 115200.

You are now all set to install WinLirc (I used version 0.6.3). Configure it to:

correct com port
speed: 115200
Receiver typee: RX Device
virtual pulse: 300
Transmitter settings: TX
and you need to set a config file (the lircd.conf file that Peter posted).

Open winlirc from the taskbar and select pioneer region and sed the code and thats it. Worked for me in the first try.
ngielska)