Powrót   Forum CDRinfo.pl > Napędy optyczne i nagrywanie CD, DVD, Blu-ray, HD DVD > Flashowanie/Firmware/Podkręcanie napędów optycznych

Flashowanie/Firmware/Podkręcanie napędów optycznych Tematy poświęcone modyfikacjom biosów i nagrywarek



Witaj Nieznajomy! Zaloguj się lub Zarejestruj

Zarejestrowani użytkownicy mają dostęp do dodatkowych opcji, lepszej wyszukiwarki oraz mniejszej ilości reklam. Rejestracja jest całkowicie darmowa!

Odpowiedz na post
 
Opcje związane z dyskusją Tryby wyświetlania
Stary 22.07.2023, 15:23   #1
PlextorMan
Zarejestrowany
 
Data rejestracji: 21.07.2023
Lokalizacja: Czech Republic
Posty: 12
PlextorMan w tym momencie nie ma Reputacji dodatnich ani ujemnych <0  pkt>
Problem with CrossFlash Lite-On IHBS212 to Plextor PX-LB950SA

Hello,

I recently bought a new Lite-on IHBS212 (retail) on eBay and I found the following problem:

The Drive burns on the media: "Verbatim BD-RE 2x" at only 1x speed.


Burning is slow and poor quality.
See Image below:





Therefore, I decided to update the firmware in my drive from: https://www.firmwarehq.com/download_..._HL05.EXE.html

to the version: "HL05" (Lite-on IHBS212 2) and the problem was not solved.

Then I tried to CrossFlash at: "Plexor PX-LB950SA" using a binary file: "Plextor_px-LB950SA_GEN1_1.06.bin". Because my version of the drive is:
"Lite-on IHBS212.BD Writer Board Rev: 01 Manufactured Date: March 2011." And I stopped at the program: "Flash program V2.3.46".
See Picture below:



After flashing, the drive remains still as Liteon IHBS212.

I restored the firmware back using "EEPROM UTILITY SE 6.2.0".

I do not know if I have the right version of this program for Lite-on IHBS212 Rev1.

UPDATE (change of Link): I followed the instructions here: Crossflash BluRay LiteOn iHBS+OEM+klony

My question is:

How can I complete this CrossFlash to solve this problem?

*** Thank you very much.***

Ostatnio zmieniany przez PlextorMan : 22.07.2023 o godz. 16:47
PlextorMan jest offline   Odpowiedz cytując ten post

  #ads
CDRinfo.pl
Reklamowiec
 
 
 
Data rejestracji: 29.12.2008
Lokalizacja: Sieć globalna
Wiek: 31
Posty: 1227
 

CDRinfo.pl is online  
Stary 22.07.2023, 15:54   #2
Oinker
Zarejestrowany
 
Data rejestracji: 08.11.2022
Lokalizacja: Niemcy
Posty: 44
Oinker w tym momencie nie ma Reputacji dodatnich ani ujemnych <0  pkt>
You need to drag'n'drop the firmware .bin file on the FUFlasher.exe in Windows Explorer. It'll auto-start the FUFlasher then, and should show the Update version 1.06. Ensure you're on the correct drive before flashing! Regarding the slow write speed, do you have verification during write active? That'll slow down the write speed to 50% of what you've chosen (i.e. 1x in this case of 2x writing).
Oinker jest offline   Odpowiedz cytując ten post
Stary 22.07.2023, 16:44   #3
PlextorMan
Zarejestrowany
 
Data rejestracji: 21.07.2023
Lokalizacja: Czech Republic
Posty: 12
PlextorMan w tym momencie nie ma Reputacji dodatnich ani ujemnych <0  pkt>
Cytat:
Napisany przez Oinker Podgląd Wiadomości
You need to drag'n'drop the firmware .bin file on the FUFlasher.exe in Windows Explorer. It'll auto-start the FUFlasher then, and should show the Update version 1.06. Ensure you're on the correct drive before flashing! Regarding the slow write speed, do you have verification during write active? That'll slow down the write speed to 50% of what you've chosen (i.e. 1x in this case of 2x writing).

Drag'n'drop for this program (fu_flasher.exe) does not work, the program does not allow the firmware to be dragged into the window.

And the burning is equally slow even in the program "Nero Burning Rom".
PlextorMan jest offline   Odpowiedz cytując ten post
Stary 22.07.2023, 17:21   #4
Oinker
Zarejestrowany
 
Data rejestracji: 08.11.2022
Lokalizacja: Niemcy
Posty: 44
Oinker w tym momencie nie ma Reputacji dodatnich ani ujemnych <0  pkt>
Not into the program window, the exe in Explorer, i.e. in the pic above you click on the bin file hold it and just drag it on the exe file above the bin. In Nero you have to open Recorder menu -> Drive selection -> Options button -> Disable defect management.
Oinker jest offline   Odpowiedz cytując ten post
Stary 22.07.2023, 20:01   #5
PlextorMan
Zarejestrowany
 
Data rejestracji: 21.07.2023
Lokalizacja: Czech Republic
Posty: 12
PlextorMan w tym momencie nie ma Reputacji dodatnich ani ujemnych <0  pkt>
Cytat:
Napisany przez Oinker Podgląd Wiadomości
Not into the program window, the exe in Explorer, i.e. in the pic above you click on the bin file hold it and just drag it on the exe file above the bin. In Nero you have to open Recorder menu -> Drive selection -> Options button -> Disable defect management.
OK, The Flashing Was Successful. Thanx!



The speed of burning in Nero is already OK, but in Opti Drive Control it cannot be set.

Is there any possibility to turn this off on this drive?

And one more question:

How can I restore the original (backed) Lite-On firmware for multiple tests?
I attempted to restore with: "EEPROM UTILITY with 6.2.0" (Restore Eeprom Button) and it failed.

Thank you.
PlextorMan jest offline   Odpowiedz cytując ten post
Stary 22.07.2023, 21:01   #6
Oinker
Zarejestrowany
 
Data rejestracji: 08.11.2022
Lokalizacja: Niemcy
Posty: 44
Oinker w tym momencie nie ma Reputacji dodatnich ani ujemnych <0  pkt>
The EEPROM is only for the laser calibration data, it's specific for each drive and shouldn't be changed. In order to go back to the original firmware you need a bin file og it, and use it with the FUFlasher like you did with the Plextor firmware.
Oinker jest offline   Odpowiedz cytując ten post
Stary 22.07.2023, 21:52   #7
PlextorMan
Zarejestrowany
 
Data rejestracji: 21.07.2023
Lokalizacja: Czech Republic
Posty: 12
PlextorMan w tym momencie nie ma Reputacji dodatnich ani ujemnych <0  pkt>
Cytat:
Napisany przez Oinker Podgląd Wiadomości
The EEPROM is only for the laser calibration data, it's specific for each drive and shouldn't be changed. In order to go back to the original firmware you need a bin file og it, and use it with the FUFlasher like you did with the Plextor firmware.
Unfortunately, it is not possible.
If I drag the file: "ATAPI_iHBS212_2_HL05.bin" on the Exe file (FU_Flasher.exe).
The program starts and exits immediately. Backup BIN file IHBS212 It has only 8 kb size. Plextor Firmware has 2 MB.
I don't know where the problem could be.

But the program: "EEPROM Utility SE 6.2.0" always creates only 8KB file.
PlextorMan jest offline   Odpowiedz cytując ten post
Stary 22.07.2023, 23:07   #8
Oinker
Zarejestrowany
 
Data rejestracji: 08.11.2022
Lokalizacja: Niemcy
Posty: 44
Oinker w tym momencie nie ma Reputacji dodatnich ani ujemnych <0  pkt>
Yes, the EEPROM Utility just saves the laser calibration data, thus the 8 kB file, it can not be used for firmware flashing. Only to restore the laser calibration data. You must use a firmware bin file, which is 2 MB.
Oinker jest offline   Odpowiedz cytując ten post
Stary 22.07.2023, 23:23   #9
PlextorMan
Zarejestrowany
 
Data rejestracji: 21.07.2023
Lokalizacja: Czech Republic
Posty: 12
PlextorMan w tym momencie nie ma Reputacji dodatnich ani ujemnych <0  pkt>
OK, Thanx.
PlextorMan jest offline   Odpowiedz cytując ten post
Odpowiedz na post

Tagi
crossflash, ihbs212, lite-on, plextor, problem, px-lb950sa

Opcje związane z dyskusją
Tryby wyświetlania

Twoje uprawnienia:
Nie możesz rozpoczynać nowych tematów
Nie możesz odpowiadać w tematach
Nie możesz umieszczać załączników
Nie możesz edytować swoich postów

BB codeWłączone
EmotikonkiWłączone
Kody [IMG]Włączone
Kody HTML są Wyłączone

Teleport


Wszystkie czasy w strefie CET. Aktualna godzina: 21:29.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.