|
Witam !
UPG do nowszej wersji w moim przypadku chyba ni jest dla sportu - o czym mówi spora lista zmian.....
************************************************** *************
P4P800 Deluxe and P4P800 BIOS V1008
Do not use Aflash.exe / EZflash /Afudos.exe to update BIOSV1008
Extract all the files into the floppy disk,and simply run P4P81008.exe under DOS mode,the BIOS update will execute automatically.Please refer to the readme file which is included in the zipfile to get the details of BIOS update procedure.
Fix memory test failure with Memtest-86 v3.0.
Remove the redundant blank line in the popup window of "Restore on AC Power Loss" setup item.
Fix the system takes long time to boot if IDE CD-ROM drive is loaded with non-bootable CDR disc.
Support system powering up by pressing "Space Bar", "Ctrl-Esc" and "Power Key" of PS/2 keyboard.
Fix DMI data structure in F-Segment is destroyed if the length of System Manufacturer string exceeds 23 characters.
Fix "RTC Alarm Date" setup item is hidden if "Every Day" is selected.
Support Intel OSB.
Fix the system cannot boot up if Intel SRCU31 PCI RAID card or ASUS PCI wireless LAN card is used.
Fix customized 256-color logo cannot be displayed with correct palette.
Fix the system locks up during POST if Elixir M2U25664DSH8B1G PC2700 or M2U25664DSH8B0G PC2100 DDR SDRAM module is used.
P4P800 Deluxe and P4P800 BIOS V1007
Add Performance Mode in BIOS setup menu.
P4P800 Deluxe and P4P800 BIOS V1006
Do not use Aflash.exe / EZflash /Afudos.exe to update BIOSV1006
Extract all the files into the floppy disk,and simply run P4P81006.exe under DOS mode,the BIOS update will execute automatically.Please refer to the readme file which is included in the zipfile to get the details of BIOS update procedure.
Improve overclocking capability when FSB is greater than 300MHz.
Fix the system cannot boot from bus powered USB ZIP-250 drive sometimes.
Improve overclocking margin for FSB set between 166 and 199MHz.
Correct FSB frequencies of a few Willamette CPUs.
Fix EZFlash failure if ATI 9700 Pro or 3DLabs Wildcat II 5110 are used.
Fix the system fails to boot from floppy drive A: after the first boot failure if an IDE CDROM drive is attached.
Support CPU VCORE adjustment up to 1.95V.
Update the boot ROM of onboard LAN controller.
Fix failure to initialize VGA after BIOS upgrade or the system is put in Mechanical Off state for 1 minute.
Support new CPU.
Improve Instant Music compatibility with different optical drives and keyboards.
Change onboard VIA RAID boot ROM to 6410v112.rom.
Fix CPU Fan Failure alarm if Intel boxed CPU fan is used.
************************************************** ****************
Z tym IO.sys masz racje - pisali na paru www ze plik ten posiada błąd i nalezy uzyc wersji porawionej - zetsaw plikow który dałem w załczniku jest juz ok i dziala praidłowo.
Co do wyłączenia pradu - mam 15 minutowy UPS....
|