Podgląd pojedynczego posta
Stary 04.01.2007, 22:21   #31
AleX69
.::MaNNErS:SuCk::.
 
Avatar użytkownika AleX69
 
Data rejestracji: 25.02.2004
Lokalizacja: Warszawa
Posty: 4,681
AleX69 po prostu jest dobry(a) <350 - 449 pkt>AleX69 po prostu jest dobry(a) <350 - 449 pkt>AleX69 po prostu jest dobry(a) <350 - 449 pkt>AleX69 po prostu jest dobry(a) <350 - 449 pkt>
Cytat:
Napisany przez silent22 Podgląd Wiadomości
Teraz znowu smigam po stronkach wszystko ok wlaczam rapidshare z linka i zwiecha ehh
pzdr
Cytat:
Stop 0x0000000A or IRQL_NOT_LESS_OR_EQUAL


The Stop 0xA message indicates that a kernel-mode process or driver attempted to access a memory location to which it did not have permission, or at a kernel interrupt request level (IRQL) that was too high. A kernel-mode process can access only other processes that have an IRQL lower than, or equal to, its own. This Stop message is typically due to faulty or incompatible hardware or software.

Possible Resolutions:

***8226; A Stop 0xA message might occur after installing a faulty device driver, system service, or firmware. If a Stop message lists a driver by name, disable, remove, or roll back the driver to correct the problem. If disabling or removing drivers resolves the issues, contact the manufacturer about a possible update. Using updated software is especially important for multimedia applications, antivirus scanners, and CD mastering tools.

***8226; A Stop 0xA message might also be due to failing or defective hardware. If a Stop message points to a category of devices (video or disk adapters, for example), try removing or replacing the hardware to determine if it is causing the problem.

***8226; If you encounter a Stop 0xA message while upgrading to Windows XPl, the problem might be due to an incompatible driver, system service, virus scanner, or backup. To avoid problems while upgrading, simplify your hardware configuration and remove all third-party device drivers and system services (including virus scanners) prior to running setup. After you have successfully installed Windows XP, contact the hardware manufacturer to obtain compatible updates.

jak nie sieciowka to moze kabel ... ale raczej tu mogly by sie pojawic problemy z transmisja
niz BSoD

moim zdaniem jest narzygane w systemie ...
pytalem wczesniej masz wszystkie update'y systmu ze strony microsoftu wraz SP2?
TU znajdziesz pomocne w diagnozowaniu twojego problemu narzedzia
__________________

Ostatnio zmieniany przez AleX69 : 04.01.2007 o godz. 22:23
AleX69 jest offline   Odpowiedz cytując ten post

  #ads
CDRinfo.pl
Reklamowiec
 
 
 
Data rejestracji: 29.12.2008
Lokalizacja: Sieć globalna
Wiek: 31
Posty: 1227
 

CDRinfo.pl is online