LiteOn LDW-401S@411S / LDW-411S >>> LDW-811S

[sakis]

Pojawila sie dlugo oczekiwana modyfikacja v4
Oto link: http://www.speedlabs.org/

[mbar]

V4 MOD już jest! Na stronie http://www.speedlabs.org/

[namor]

Napisany przez mbar

V4 MOD już jest! Na stronie http://www.speedlabs.org/

już jest ściągnełem go tylko nie wiem czy nie jest uszkodzony ,nie moge go uruchomić (jego waga u mnie to 187kbczy tyle powinien mieć)

[kasiarz_]

jakos dzisiaj jest tam strona LITE ON a orginalna

[Boger]

Macie juz tego mod'a? Skad mozna go sciagnac, bo pod speedlabs.org jest (tak jak pisze kasiarz_) strona liteon'a! Moze kowanski wrzuci go na swoja strone? (chyba ze juz to zrobil-nie moge sie dostac bo "limit przekroczony ).

[macnow]

???????????????????????????????????????????????????????????????????????????????????????????????????????
ZZZZZZZZZZZZZZZZZZ         411s@811s EEPROM repair tool to improve upgrade:   (v4.0) ZZZZZZZZZZZZZZZZZZ
???????????????????????????????????????????????????????????????????????????????????????????????????????

Included in the package:

* Patcher.exe (for EEPROM modification only)
* FlashFix.exe (for modification of official firmware only)
* LTNFlash     (for reading and writing of your EEPROM)
* This .nfo file!


i)    Things to be aware of:


Ľ    This modification technique fixes the MAJOR problems with the other methods. DVD-R 
    (minus or negative) writing @ 2X and 4X is now possible with 411S@811S. It fixes the
    freeze on lead out issues that were synonymous with the previous modification technique.

    It goes without saying, it also fixes 8x & 6x writing, to the
    best of the current build can accommodate.

Ľ    An EEPROM is like a drives unique fingerprint ľ it is fine tuned for any given drive. 
    Putting a real 811S EEPROM right onto your 411S is just plain silly.

Ľ    This patcher corrects missing 8x and 6x calibration data, missing from the 411S drives.

Ľ    This EEPROM patcher is also a checksum correction method. Hence, it 
    will allow you to use the REAL Liteon windows flashers

Ľ    If you patch your EEPROM with this patch, you can go back to a 411S drive at any time
    via the use of LTNFlash and a .bin of the latest 411S firmware, or even a flashfixed
    official 411S Windows flasher. LOGICALLY, you MUST put your original EEPROM back on the
    drive also!

Ľ    Lots of talk about the ôSafeö tool has materialised. While this method if MUCH safer 
    than the previous method of modification that originated from the Polish, 
    nothing is totally safe. It is na´ve to think that ANY over clock is safe. 

Ľ    As every laser diode is unique, every calibration is so. But it will work for 99% of people. 
    The other 1% - this issue is being worked on

Ľ    At this time we do not know if ALL DRIVES laser diodes are rated for the needed power 
    at 8x (ca. 30mW). It could potentially be overpowered as it's only 4x rated (ca. 18mW). 
    We will know one day if the first drives fail permanently. Its unlikely however


Ľ    UNDERSTAND THIS: IF YOU HAVE A PREVIOUS MOD ON EEPROM - you NEED to use the ORIGINAL EEPROM.
    Do NOT TRY AND PATCH THIS ONTO AN ALREADY MODDED EEPROM. USE YOUR ORIGINAL.


???????????????????????????????????????????????????????????????????????????????????????????????????????
                                          ii) Instructions
???????????????????????????????????????????????????????????????????????????????????????????????????????

Ľ    Backup current EEPROM using LTNFlash. Put it somewhere SAFE. Make many copies and put them
    in places where they will never accidentally be overwritten! 

    To do this, run LTNFlash, select the 411S, go to the EEPROM tab then hit READ, then SAVE.

Ľ    Open the patcher (patcher.exe) from the command line. Have a copy of your original EEPROM in the
    same DIR as the patcher.exe

Ľ    Run the patch tool on the EEPROM by calling the patcher at command line, then typing the name
    of the original EEPROM, with the file extension, then typing the name of the new EEPROM
    you wish to create eg:

    C:/MyStuff/Patcherv4/

    patcher myEEPROM_original.bin myEEPROM_modded.bin

Ľ    Accept the warnings - if you dare. Be aware of what is being said!

Ľ    Once finished, run LTNFlash and using the EEPROM tab, LOAD the newly modified EEPROM into LTNFlash
    then WRITE the new newly modified EEPROM onto your drive.

Ľ    Download the latest firmware from LiteonIT's home page - at current time of writing, the newest 
    official firmware is HS0K.exe available from the page. 

Ľ    Use the tool FLASHFIX to run on the firmware once downloaded. It is included in the package.
    If you have problems understanding flashfix, read its readme file!

Ľ    Once you have run flashFix on the new OFFICIAL firmware you downloaded from LiteonIT's website
    run the windows patcher (HS0k.exe for example) and accept the warnings. BE VERY CAREFUL TO FLASH
    THE RIGHT DRIVE!

Ľ    Once the drive is finished programming, a forced reboot will occur! 

???????????????????????????????????????????????????????????????????????????????????????????????????????

Your EEPROM is now corrected for 8x +R writing. You can now use REAL Liteon firmware's on your drive
as they are released!

NOTE: The patcher tool is to be run from the COMMAND LINE in a DOS command window. You CANNOT run it
via double clicking! If you do not understand this, please lookup a guide on the lamerweb. 

Finally - if you break/hurt/mame/destroy/melt your drive in the process of your tweaking/OCing adventures, 
DONT be a selfish little twerp! BUY A NEW ONE - DONT WHINGE TO LITEON FOR A REPLACEMENT! YES, BUY A NEW ONE.
The company gives the enthusiast community a great deal of pleasure! The least you can do is be honest and
buy a new one if your adventures result in a nuked drive.

???????????????????????????????????????????????????????????????????????????????????????????????????????
                                          iii) GREETZ
???????????????????????????????????????????????????????????????????????????????????????????????????????


Big thanks to the whole beta team and those involved with the creation of this mod. Without you, NONE
of this would have come to fruition!

[To JA !]

jak tu dodać plik??

[To JA !]

xxx

[To JA !]

patcher.exe org_epr.bin mod_epr.bin

[To JA !]

czekam z niecierpliwością na opinie na temat działania... i na v5.... Pozdrawiam....

[Edwardo]

czyli zeby modowac 401@811 musze najpierw uzyc moda 401@411 i dopiero potem eeprom 401@411 patchowac przy uzyciu v4?
bo w instrukcji jakos nie wyczytalem nic o 401...

namor: wszytko pisze w 411S@811S_EEPROM_REPAIR_TOOL.nfo

[kowanski]

Napisany przez Edwardo

czyli zeby modowac 401@811 musze najpierw uzyc moda 401@411 i dopiero potem eeprom 401@411 patchowac przy uzyciu v4?
bo w instrukcji jakos nie wyczytalem nic o 401...

namor: wszytko pisze w 411S@811S_EEPROM_REPAIR_TOOL.nfo

Można użyć odrazu eeproma od 401s

Nie trzeba crakować firmware od 811s, ani wgrywać HS0K-*****.bin Patcher v4 przerabia tak eeprom, że można wgrywać nowe oryginalne biosy od 811s ze strony LITE-ON-a, teraz jest to "pełna" 811S

Komende można wpisać np w programie Windows Commander w wierszu polecen lub pod DOS-em

[namor]

Napisany przez kowanski

Komende można wpisać np w programie Windows Commander w wierszu polecen lub pod DOS-em

wpisuje w taki sposób
Patcher.exe/411.bin>811.bin
ale wychodzi mi pliczek o wadze 41 bajtów i nic w nim nie ma
co robie żle

[aroll]

Napisany przez namor

wpisuje w taki sposób
Patcher.exe/411.bin>811.bin
ale wychodzi mi pliczek o wadze 41 bajtów i nic w nim nie ma
co robie żle

Tu jest nakładka (GUI) na moda V4 -> http://www.members.optushome.com.au/...Mod_v4-gui.rar

[diggah]

Napisany przez namor

wpisuje w taki sposób
Patcher.exe/411.bin>811.bin
ale wychodzi mi pliczek o wadze 41 bajtów i nic w nim nie ma
co robie żle

rtfm !

Patcher.exe 411.bin 811.bin