Można prosić o link do firmware'u? Stary jest już nieaktywny.

EDIT:
Już znalazłem tu: https://chomikuj.pl/blizz040/LG_BH16NS40_firmware

Wgrałem firmware i wszystko działa, disc quality śmiga. Dzięki wielkie za poradnik.

ASUS BW-12B1ST FW1.03 to klon konstrukcji LiteOn - crossflash tej kontrukcji w innym temacie
Crossflash BluRay LiteOn iHBS+OEM+klony

Cześć, posiadam napęd ASUS BW-12B1ST FW1.03. Chciałbym tym napędem testować nagrane płyty BD-R z działającą opcją Jitter w ODC. Rozumiem, że po przeprowadzeniu Crossflash tego napędu do LiteOn iHAS324 będzie to możliwe ?

You need an unlocked flasher or SDFTool Flasher.
You need to upload the firmware without LibreDrive, only then you will be able to upload the firmware from VinPower.

https://forum.makemkv.com/forum/view...p?f=16&t=22896

Thanks, it's not every day that I flash drives, I'm afraid to turn mine into a brick. I've looked at this site several times, but I didn't get a picture of the procedure.


Is it right that the link has DE firmware for ASUS 3.1 which can be over my 3.11? I read that 3.11 can not be simply rolled back to a lower version, only with some utilities.
I don't think there are any utilities in the archive, only firmware.


What LG version should I install in the end?
I don't need anything from the video data, just a scan of the recording quality of my backups.

It is possible - first you need to upload the firmware without LibreDrive

https://forum.makemkv.com/forum/view...p?f=19&t=19113

is it possible to crossflash ASUS BW-16D1HT, Manufactured in 2021 with new FW 3.11 to any LG version with an ability to quality check BD records?
thank you

Thanks a lot for your help, unfortunately i think i found what's the problem. MakeMKV says i have 16dh1t with MT1939 and it should be MT1959. So sdftool flasher doesn't work either :( :( :( (it says something like "it's not the correct chipset" )

Is that true is that the problem? Should i dismount it and check for sure?


If it's really mt1939 is there anything and can do to make it scan bdr and/or write them better? ???

Dziękuję bardzo za pomoc, niestety chyba znalazłem przyczynę problemu. MakeMKV mówi, że mam 16dh1t z MT1939 i powinno być MT1959. Więc flasher sdftool też nie działa
Czy to prawda, czy to jest problem? Czy mam go zdemontować i sprawdzić?
Jeśli to naprawdę mt1939, czy jest coś i można zrobić, aby skanował bdr i/lub zapisywał je lepiej?

Directly upload the HL-DT-ST_BD-RE_WH16NS48_1.D3.bin firmware via sdftool flasher.

Firmware included in the package for safety, so you can return to the factory Asus version at any time.

thanks again and again :) ok so you suggest to use that sdftool flasher on windows 10, but should i use that flasher directly with flash_HL-DT-ST_BD-RE_WH16NS48_1.D3.bin or flash it with that ASUS_BW-16D1HT_1.01-00.bin?


raz jeszcze dziękuję, OK, więc sugerujesz użycie tego flashera sdftool w systemie Windows 10, ale czy powinienem używać tego flashera bezpośrednio z flash_HL-DT-ST_BD-RE_WH16NS48_1.D3.bin, czy też flashować go za pomocą tego ASUS_BW-16D1HT_1.01-00.bin?

If I remember correctly, this unlocked LG flasher sometimes had some problems with recognizing Asus models.

Here you have the newer sdftool flasher and firmware for the first generation Asus BW16D1HT 1.01

https://www.szybkiplik.pl/NPt26eQyjq

thanks again for your help (you helped me via pm a couple of times at cdfreks/myce too, years ago), as i'm explaining here crossflash Asus BW-16D1HT to Vinpower WH16NS48? the patched LG flasher ("BH16NS40(1.03-A0)-patched.exe") doesn't find my asus while another flasher ("N1.03-C0_BH16NS40_150526_dev_NOBJ.exe") see it. so i'm not sure what to do (i'm on windows7 x64)

You can directly flash VinPower firmware via unlocked LG flesher.

thanks a lot :spoko:, any advice before i try? should i go directy 16D1HT to WH16NS48 or it's better to flash it to BH16NS40 first? should i try to backup 16D1HT firmware before trying to crossflash?

wielkie dzięki, jakaś rada zanim spróbuję? czy powinienem przejść bezpośrednio z 16D1HT do WH16NS48, czy lepiej najpierw sflashować go do BH16NS40? czy powinienem spróbować wykonać kopię zapasową oprogramowania 16D1HT przed próbą crossflash?