Napisany przez MatikkMateoo (Post 1479390)

@jadburner Pomożesz z crossflashem BDR 209 do wersji 211, żeby odblokować wsparcie odczytu płyt 4k?
Z góry dziękuję. Info z MakeMKV poniżej.

Drive Information
Manufacturer: PIONEER
Product: BD-RW BDR-209M
Revision: 1.34
Serial number: QFDL056798WL
Firmware date: 2016-04-25
Bus encryption flags: 13
Highest AACS version: 55

LibreDrive Information
Status: Enabled
Drive platform: RS8600
Firmware name: PIONEER BDR-209
Firmware type: Original (unpatched)
Firmware version: 1.34/ID60
DVD all regions: Yes
BD raw data read: Yes
BD raw metadata read: Yes
Unrestricted read speed: Yes

Napisany przez SzaryKot (Post 1479028)

Hi Jadburner,
I have a small request for your help again. ***55357;***56842;
I recently bought two Pioneer drives. One is a Pioneer BDR-212BK (FW 1.00), and the other is a Pioneer BDR-S08J-BK.
I would like to cross-flash these drives, if possible, and I was wondering if you could help me with the appropriate cross-flash tools and firmware files.
As before, I fully understand the risks involved and accept full responsibility for the procedure.
I would really appreciate your help once again.
Thank you very much!
Best regards,
Szary Kot

Napisany przez SzaryKot (Post 1478756)

Hello everyone,
I have a fully functional Pioneer BDR-209BK2 (FW 1.51) drive, and I would like to cross-flash it to a BDR-211 so that I can enable UHD support.
I would greatly appreciate it if someone could share the appropriate cross-flash utility with me.
I fully understand the risks involved and accept full responsibility for the procedure.
Thank you very much for your time and any assistance.
Best regards,
Szary Kot

Napisany przez brumbassen (Post 1477768)

hello all
i have i have a BDR-209DBK that i would like to make read UHD
please

Napisany przez Klapaucjusz (Post 1477704)

Ja tez poprosze, PM wyslany. :)

Napisany przez jadburner (Post 1477610)

Send me that same info via PM.

Napisany przez udma2 (Post 1477609)

Looking to crossflash a BDR-209BDK to a UHD compatible firmware. Not interested in remote flashing services, figured I'd ask here. Would be appreciated!

Napisany przez skyrider (Post 1477577)

I wrote to Billycar11 about this, and for doing a crossflash on a drive with factory firmware newer than 12/2022 he asked for I decided that's way too much, and I'd rather wait until the author of BDRflash does something about it.

Napisany przez jadburner (Post 1477573)

The version of BDRFlash that we have does not currently support crossflashing drives with the post-November 2022 firmware. You may wish to check with Billy Carr to see if he can help you.

Napisany przez tomty89 (Post 1477566)

Btw because my S08 is already a half-dead drive (red laser down; tray is hard to eject), I'm thinking of sourcing another Pioneer drive from the local second-hand market, but I'm having the following doubt:

1. Does the current BDRFlash support crossflashing a drive that has been updated to an "unsafe" version (i.e. from Dec 2022 or later) of firmware? (I'm presuming that Dec 2022 was when the "downgrade lock" was introduced.) As the drive I just flashed presumably had a "safe" one. (I resisted the lure to update it when I saw the post-Dec 2022 1.51 updater.)
2. Should I avoid crossflashing a drive with an "unsafe" firmware for any reason(s)? (For example, only the 1.04 and 1.05 updaters for the "12th gen" models come with a kernel. If I got a 12th gen that isn't already "UHD-ready" (but "capable"), should I procure a suitable 1.02 kernel+firmware from someone? As the BDR-211UBK 1.53 firmware I got from jadburner is a "safe" one as per my knowledge.)